View Categories

25.6.2024 – Version 8.32.0

1 min read

#General

Improved

  • Stability & performance improvements
  • Node.js version upgrade – version 20.15.0
  • General security improvement

Fixed

  • myscada.createTable function
  • Set command with dynamic limits that are being read out of the PLC tag
  • In myDESIGNER when specifying DLG view you can’t use special characters anymore – sometimes when used “%” it broke runtime
  • 5005 port locked (Security improvement)
  • Settings project access – increased the period when settings prj. checked for user if he is logged sometimes in very rare cases when the connection was very slow it tended to kick user out of the settings project even tho he logged in successfully.
  • log4j package has been removed from the myDESIGNER libs as this package has been considered as vulnerability

 

#myPANEL

Improved

  • Stability & performance improvements
  • Added an update which has around 700 Mb, this update contains full chromium in snap – that will ensure that all the myPANEL’s will run on the same version of the browser – this might cause in some very rare cases that the resolution of the display will not be as it’s supposed to be in these very rare cases, please access myPANEL settings project via. laptop and head to the system ->display section and adjust any of the parameters (Like check “show cursor” option). Click save and reboot panel it should appear correctly now. If you would have any difficulties contact us via. the technical support ticket system

 

#myBOX rev.B

  • 8.32.0 Update requires myBOX to be online – connected to the internet as it will download node.js 20.15 from the internet, if the myBOX won’t be connected to the internet it will keep original version of the node.js (You can re-apply 8.32.0 update if the myBOX wasn’t online and you have it now online and you require a new node.js version)

 

#myBOX rev.A

  • Version 8.32 doesn’t contain a node.js update as the CPU architecture doesn’t allow us to. By this version, we also end support for the myBOX V8 rev. A

 

#myPANEL x64

  • The update contains node.js 17.X, not 20.15 as other SW as myPANEL OS doesn’t allow us to use a higher version, other than that the myPANEL has to be connected to the internet as well in order of getting the node.js update
  • to unify configuration files the resolution of the myPANEL might become “broken” after this update for some myPANELs depending on their age, to fix this issue, head to the settings menu and in the settings -> Display change the display orientation to  90 degrees, reboot myPANEL and then head once more into settings and set it back to 0 this should make myPANEL resolution to appear correctly again. In case of this fix not working, please submit a ticket to our technical support.